CPT (Current Procedural Terminology) codes are five-character codes that describe medical procedures and services, such as office visits, lab tests, imaging and surgery. They are owned by the American Medical Association (AMA) and are a HIPAA standard code set in the US. Category I codes are five digits (for example 99213, an office visit for an established patient); Category II codes end in F and track quality; Category III codes end in T and cover new technology. CPT codes are paired with ICD-10-CM diagnosis codes on every claim. The CPT 2027 code set, with 299 new codes, takes effect on 1 January 2027.
Key takeaways
- CPT codes describe what was done; ICD-10-CM codes describe why.
- Category I: five digits, six sections. Category II ends in F; Category III ends in T.
- Modifiers are two characters added to a CPT code to give extra information, such as 25 or 59.
- CPT is updated every 1 January; CPT 2027 brings 299 new, 74 revised and 80 deleted codes.
- CPT descriptions are copyrighted by the AMA, so coders work from a licensed code book or software.
On this page ⌄
What are CPT codes?
CPT stands for Current Procedural Terminology. CPT codes describe the medical, surgical and diagnostic services a provider performs, so every insurer reads a claim the same way. The American Medical Association (AMA) owns CPT, and an independent CPT Editorial Panel of clinical experts maintains it. The US Department of Health and Human Services named CPT a national code set under HIPAA.
Answers
- ICD-10-CM
- Why was the patient seen? (diagnosis)
- CPT
- What did the provider do? (service or procedure)
- HCPCS Level II
- What supplies, equipment or drugs were given?
Example
- ICD-10-CM
- E11.9 — type 2 diabetes without complications
- CPT
- 99213 — office visit for an established patient
- HCPCS Level II
- A4253 — blood glucose test strips
For the full picture of all three, read what is medical coding.
The three categories of CPT codes
All CPT codes have five characters, but there are three categories, plus a group for unique lab tests.
Format
- Category I
- Five digits
- Category II
- Four digits + F
- Category III
- Four digits + T
- PLA codes
- Four digits + U
Used for
- Category I
- Established procedures and services; most codes coders use
- Category II
- Optional tracking of quality and performance measures
- Category III
- Temporary codes for new and emerging technology and services
- PLA codes
- Proprietary laboratory analyses: one specific lab’s or maker’s test
Example
- Category I
- 93000 — routine ECG with at least 12 leads, with interpretation and report
- Category II
- 2022F — dilated retinal eye exam in a diabetic patient with retinopathy
- Category III
- Released twice a year; some later become Category I codes
- PLA codes
- 0001U — a named red-cell antigen typing test
Category II codes are not paid on their own; they report quality data. Use a Category III code instead of an unlisted Category I code when one exists for the service.
The six sections of Category I CPT codes
Category I CPT codes are grouped into six sections. Evaluation and Management comes first in the book, even though its codes start with 9, because visits are the most frequently reported services.
Code range
- Evaluation and Management (E/M)
- 98000–98016, 99202–99499
- Anesthesia
- 00100–01999, 99100–99140
- Surgery
- 10004–69990
- Radiology
- 70010–79999
- Pathology and Laboratory
- 80047–89398
- Medicine
- 90281–99199, 99500–99607
Covers
- Evaluation and Management (E/M)
- Office, hospital, emergency and telemedicine visits
- Anesthesia
- Anesthesia for procedures
- Surgery
- Procedures by body system, from skin to eye and ear
- Radiology
- X-ray, CT, MRI, ultrasound, nuclear medicine
- Pathology and Laboratory
- Lab tests and pathology
- Medicine
- Vaccines, cardiology tests, therapy, dialysis and more
CPT codes with real examples
Here are common CPT codes with plain-English summaries. The official descriptions are copyrighted by the AMA, so these are paraphrased.
Section
- 99203
- E/M
- 99213
- E/M
- 99285
- E/M
- 10060
- Surgery
- 71046
- Radiology
- 83036
- Pathology and Lab
- 36415
- Pathology and Lab
- 93000
- Medicine
In plain English
- 99203
- Office visit for a new patient (low level of decision making)
- 99213
- Office visit for an established patient (low level of decision making)
- 99285
- Emergency department visit with a high level of decision making
- 10060
- Simple incision and drainage of an abscess, such as a boil or cyst
- 71046
- Chest X-ray, two views
- 83036
- HbA1c (glycated haemoglobin) blood test
- 36415
- Drawing blood from a vein (venipuncture)
- 93000
- Routine 12-lead ECG with interpretation and report
How CPT and ICD-10-CM work together: a diabetes follow-up might be billed as 99213 (visit), 83036 (HbA1c test) and 36415 (blood draw), each linked to the diagnosis E11.9. Insurers check that every service is supported by a diagnosis. A test without a matching diagnosis is a common reason for denial.
How office visit CPT codes are chosen
Office visit codes come in levels — for example 99202 to 99205 for new patients and 99212 to 99215 for established patients. Since 2021, the level is chosen by either the medical decision making documented or the total time the provider spent on the day of the visit.
- New or established patient? New means the patient has not had a professional service from that provider (or the same specialty in the same group) in the past three years.
- Medical decision making: based on the problems addressed, the data reviewed and the risk of management.
- Time: total provider time on the date of the encounter, when documented.
Choosing a higher level than the record supports is upcoding, and a lower one is undercoding. Both are compliance problems that audits catch.
CPT modifiers explained
A modifier is a two-character add-on that changes or explains a CPT code without changing its meaning. It tells the insurer something special happened.
Type
- 25
- CPT
- 59
- CPT
- 26
- CPT
- TC
- HCPCS
- RT / LT
- HCPCS
Used when
- 25
- A significant, separately identifiable E/M visit happens on the same day as a procedure
- 59
- A procedure is distinct from another done the same day (for example, a different site or session)
- 26
- Only the professional component (the reading and report) is billed
- TC
- Only the technical component (the equipment and staff) is billed
- RT / LT
- The procedure was on the right or left side of the body
Modifiers affect payment, so they are audited closely. Modifiers 25 and 59 in particular must be supported by the documentation.
CPT 2027: what changes on 1 January 2027
CPT is updated every year on 1 January, while new Category III codes are released twice a year. The AMA released the CPT 2027 code set on 9 September 2026:
Number
- New codes
- 299
- Revised codes
- 74
- Deleted codes
- 80
- Total editorial changes
- 453
- Maternity care: the old “global” maternity package codes are replaced by separate reporting for each phase of care, such as antepartum, delivery and postpartum.
- AI-related services: new codes bring the total number of AI-related CPT codes to 43.
- Other areas named by the AMA include ventricular assist devices, hernia repair, prostate biopsy, biofeedback, radiology and sleep medicine.
Diagnosis codes change on a different date: the ICD-10-CM update took effect on 1 October 2026. See ICD-10-CM 2027 updates.
Common CPT coding mistakes
- Coding from a cheat sheet instead of the current CPT book or encoder. Codes and rules change every January.
- Choosing the visit level by habit rather than the documented decision making or time.
- Missing or wrong modifiers, such as adding 25 without a separately documented visit.
- Unbundling: billing separate codes for parts of a procedure that one code already includes.
- No linked diagnosis: every CPT code must be supported by an ICD-10-CM code.
How to learn CPT codes
Unlike ICD-10-CM, which CMS publishes free, the full CPT code set is licensed by the AMA. Coders learn from the current CPT Professional code book or licensed coding software, and practise on real patient records. The AAPC CPC exam is open book, and you use the current CPT book in the exam — see CPC certification in India.
Learn CPT with BCRI
BCRI’s medical coding course runs for 3 months (₹25,000), Monday to Friday, covering CPT, ICD-10-CM and HCPCS with real case practice, modifiers and CPC mock exams. Join the online medical coding course from anywhere, or our Bangalore classroom.
FAQs
What are CPT codes?
CPT (Current Procedural Terminology) codes are five-character codes that describe medical procedures and services, such as visits, tests, imaging and surgery. They are owned by the AMA and used on US healthcare claims.
What is the difference between CPT and ICD-10 codes?
CPT codes describe what the provider did. ICD-10-CM codes describe why — the diagnosis. A claim needs both, and the diagnosis must support the service.
What are the three categories of CPT codes?
Category I (five digits) covers established procedures and services. Category II (four digits and F) tracks quality measures. Category III (four digits and T) covers new and emerging technology.
What is a CPT modifier?
A two-character add-on to a CPT code that gives extra information, such as 25 for a separate same-day visit, 59 for a distinct procedure or RT/LT for the side of the body.
How often do CPT codes change?
The main update takes effect every 1 January. Category III codes are released twice a year. CPT 2027 has 299 new, 74 revised and 80 deleted codes.
Is the CPT code list free?
No. CPT is copyrighted and licensed by the AMA. Coders use the current CPT code book or licensed software. ICD-10-CM, by contrast, is free from CMS.
What is CPT code 99213?
An office or outpatient visit for an established patient with a low level of medical decision making, or the required total time. It is one of the most common CPT codes.
Do medical coders in India use CPT?
Yes. Most coders in India work on US healthcare claims, which use CPT for procedures, ICD-10-CM for diagnoses and HCPCS for supplies.