ICD-10-CM is the US diagnosis code set used on healthcare claims. Each code has 3 to 7 characters: a letter, then numbers (and sometimes letters), with a dot after the third character, such as E11.22 for type 2 diabetes with diabetic chronic kidney disease. To find a code, look up the diagnosis in the Alphabetic Index, then always confirm it in the Tabular List and follow its notes. Codes must be reported to the full number of characters available, including any 7th character and placeholder X. The FY 2027 code set applies from 1 October 2026 to 30 September 2027.
Key takeaways
- ICD-10-CM codes have 3–7 characters; a 3-character category alone is usually not a valid code.
- Always find the term in the Alphabetic Index, then verify it in the Tabular List.
- Some codes need a 7th character (for injuries: A, D or S) and a placeholder X to reach it.
- Excludes1 means never code together; Excludes2 means both may be coded.
- The FY 2027 code set and guidelines took effect on 1 October 2026.
On this page ⌄
What is ICD-10-CM?
ICD-10-CM stands for International Classification of Diseases, 10th Revision, Clinical Modification. It is the US version of the World Health Organization’s ICD-10, used to code every diagnosis, symptom and reason for a visit on US healthcare claims. CDC’s National Center for Health Statistics (NCHS) and CMS maintain it.
It is one of three code sets a medical coder uses: ICD-10-CM for diagnoses, CPT for procedures and HCPCS Level II for supplies. If you are new to all three, start with what is medical coding. This guide goes deep on ICD-10-CM only.
The rules are mandatory
The ICD-10-CM Official Guidelines for Coding and Reporting say adherence is required under HIPAA, the US law that sets health data standards. That is why coders learn the guidelines, not just the codes.
ICD-10-CM for beginners: how to read a code
Every ICD-10-CM code starts with a letter. The first three characters are the category, a dot follows, and up to four more characters add detail. Here is E11.22, broken down:
Characters
- Category
- E11
- 4th character
- .2
- 5th character
- 2
- Full code
- E11.22
Meaning
- Category
- Type 2 diabetes mellitus
- 4th character
- With kidney complications
- 5th character
- Diabetic chronic kidney disease
- Full code
- Type 2 diabetes mellitus with diabetic chronic kidney disease
The guidelines require you to report a code to the highest number of characters available. E11 alone is a category heading, not a reportable code. The more characters a code has, the more specific it is, and the record must support that detail.
The 22 chapters of ICD-10-CM
The Tabular List is divided into 22 chapters, mostly by body system. The first letter of a code tells you roughly which chapter it belongs to.
Codes
- 1
- A00–B99
- 2
- C00–D49
- 3
- D50–D89
- 4
- E00–E89
- 5
- F01–F99
- 6
- G00–G99
- 7
- H00–H59
- 8
- H60–H95
- 9
- I00–I99
- 10
- J00–J99
- 11
- K00–K95
- 12
- L00–L99
- 13
- M00–M99
- 14
- N00–N99
- 15
- O00–O9A
- 16
- P00–P96
- 17
- Q00–QA1
- 18
- R00–R99
- 19
- S00–T88
- 20
- V00–Y99
- 21
- Z00–Z99
- 22
- U00–U85
Covers
- 1
- Infectious and parasitic diseases
- 2
- Neoplasms (tumours)
- 3
- Blood and immune disorders
- 4
- Endocrine, nutritional and metabolic diseases
- 5
- Mental, behavioural and neurodevelopmental disorders
- 6
- Nervous system
- 7
- Eye and adnexa
- 8
- Ear and mastoid process
- 9
- Circulatory system
- 10
- Respiratory system
- 11
- Digestive system
- 12
- Skin and subcutaneous tissue
- 13
- Musculoskeletal system and connective tissue
- 14
- Genitourinary system
- 15
- Pregnancy, childbirth and the puerperium
- 16
- Conditions of the perinatal period
- 17
- Congenital malformations and genetic disorders
- 18
- Symptoms, signs and abnormal findings
- 19
- Injury, poisoning and other external-cause consequences
- 20
- External causes of morbidity
- 21
- Factors influencing health status and contact with health services
- 22
- Codes for special purposes
Notice that some chapter ranges now end in letters, such as O9A and QA1. Code books change every year, which is why coders always work from the current edition. See what changed this year in the ICD-10-CM 2027 updates.
The 7th character and the placeholder X
Some categories need a 7th character, most often injuries in chapter 19. The guidelines say a code that needs a 7th character is invalid without it. For most injuries, the 7th character describes the encounter:
Meaning
- A
- Initial encounter (active treatment)
- D
- Subsequent encounter (healing or recovery phase)
- S
- Sequela (a late effect of the injury)
Example
- A
- S93.01XA — subluxation of right ankle joint, initial encounter
- D
- S93.01XD — subluxation of right ankle joint, subsequent encounter
- S
- S93.01XS — subluxation of right ankle joint, sequela
Why the X? S93.01 has only five characters, but the 7th character must sit in position seven. ICD-10-CM fills the gap with a placeholder X, which the guidelines say must be used for the code to be valid. Another common example is poisoning: T36.0X1A is poisoning by penicillins, accidental (unintentional), initial encounter.
When a code is already six characters long, no X is needed: S93.401A (sprain of an unspecified ligament of the right ankle, initial encounter) adds the A directly.
ICD-10-CM notes every beginner must read
The Tabular List is full of short instructions. In any ICD-10-CM for beginners course, these notes take the most practice, because missing them is the most common beginner error.
What it means
- Excludes1
- “Not coded here” — never report the two codes together
- Excludes2
- “Not included here” — the patient may have both, so both can be coded
- Use additional code
- Add a second code for more detail
- Code first
- Another code must be listed before this one
- NEC
- “Not elsewhere classifiable” — the “other specified” code
- NOS
- “Not otherwise specified” — the same as unspecified
Real example
- Excludes1
- Under E11 (type 2 diabetes): type 1 diabetes mellitus (E10.-)
- Excludes2
- Under S93 (ankle sprain and dislocation): strain of muscle and tendon of ankle and foot (S96.-)
- Use additional code
- At E11.22: use an additional code for the stage of chronic kidney disease (N18.1–N18.6)
- Code first
- Common with manifestation codes
- NEC
- Used when the record is specific but no specific code exists
- NOS
- Used when the record does not give more detail
How to find an ICD-10-CM code, step by step
The guidelines are clear: first locate the term in the Alphabetic Index, then verify the code in the Tabular List. Here is the method with a worked example — a patient with type 2 diabetes and stage 4 chronic kidney disease, where the doctor documents that the kidney disease is due to diabetes.
- 1
1. Pick the main term
Find the main condition in the record — here, “Diabetes”. Look it up by the condition, not by the body part.
- 2
2. Follow the Index sub-terms
Under Diabetes → type 2 → with → chronic kidney disease, the Index points to E11.22.
- 3
3. Verify in the Tabular List
Go to E11.22 in the Tabular List. Confirm the title matches the record and check the notes at the code, subcategory and category level.
- 4
4. Follow the instructions
E11.22 says “use additional code to identify stage of chronic kidney disease (N18.1–N18.6)”. Stage 4 is N18.4, chronic kidney disease, stage 4 (severe).
- 5
5. Check excludes notes
The E11 Excludes1 note lists type 1 diabetes (E10.-). The record says type 2, so there is no conflict.
- 6
6. Report to full length
Both codes are complete and billable. Final codes: E11.22, then N18.4.
Practice example only
This example shows the method. Real coding always follows the full medical record, the official guidelines and any payer rules, and unclear documentation is queried with the doctor, never guessed.
Common ICD-10-CM mistakes beginners make
These are the errors trainers see most often when teaching ICD-10-CM for beginners:
- Coding from the Index alone. The Index does not always give the full code. Always verify in the Tabular List.
- Stopping at the category. E11 or S93 is not a reportable code. Go to the highest number of characters available.
- Missing the 7th character or the X. S93.01A is invalid; S93.01XA is correct.
- Using an unspecified code when the record says more. If the doctor documents the side, stage or type, code it.
- Ignoring “use additional code”. Leaving out N18.4 with E11.22 loses information the payer needs.
- Working from an old code book. Codes change every year on 1 October, so use the current edition.
An ICD-10-CM for beginners study plan
Learning ICD-10-CM for beginners does not need expensive material, and you can start for free. CMS publishes the full FY 2027 ICD-10-CM code tables, the Alphabetic Index and the official guidelines on its ICD-10 page. Read the guidelines’ Section I first: it explains every convention in this article.
- 1
Week 1–2: Learn the structure
Chapters, code format, conventions and the Index-then-Tabular method.
- 2
Week 3–4: Code simple cases
One-diagnosis records: infections, diabetes, hypertension, asthma.
- 3
Then: Multi-code cases
Combination codes, “use additional code” pairs, injuries with 7th characters, and sequencing.
- 4
Finally: Timed practice
Full patient records under time pressure, as in real work and the CPC exam.
Most coders in India also learn CPT and HCPCS and aim for the AAPC CPC exam, which tests all three. See CPC certification in India for the exam.
Learn ICD-10-CM with BCRI
BCRI’s medical coding course runs for 3 months (₹25,000), Monday to Friday, with ICD-10-CM, CPT and HCPCS taught on real case practice and CPC mock exams. Study live online from anywhere through the online medical coding course, or in our Bangalore classroom.
FAQs
What is ICD-10-CM, for beginners?
It is the US list of diagnosis codes. Every diagnosis, symptom or reason for a visit on a US healthcare claim is written as an ICD-10-CM code, such as E11.9 for type 2 diabetes without complications.
How many characters does an ICD-10-CM code have?
Between 3 and 7. The first is always a letter, a dot follows the third character, and codes must be reported to the highest number of characters available.
How many chapters are in ICD-10-CM?
There are 22 chapters in FY 2027, from Chapter 1 (infectious diseases, A00–B99) to Chapter 22 (codes for special purposes, U00–U85).
What does the X mean in an ICD-10-CM code?
X is a placeholder. It fills empty positions so a required 7th character can sit in position seven, as in S93.01XA. The code is invalid without it.
What do A, D and S mean at the end of injury codes?
For most injury codes, A means initial encounter (active treatment), D means subsequent encounter (healing or recovery) and S means sequela (a late effect).
What is the difference between Excludes1 and Excludes2?
Excludes1 means the two conditions are never coded together. Excludes2 means the excluded condition is not part of the code, but the patient may have both, so both can be coded.
Can I code from the Alphabetic Index only?
No. The official guidelines say to locate the term in the Alphabetic Index and then verify the code in the Tabular List, because the Index does not always give the complete code.
When does ICD-10-CM change?
The main update takes effect every 1 October. The FY 2027 code set applies from 1 October 2026 to 30 September 2027. CDC also published an April 2026 update to the FY 2026 code set.